Whether you have an asphalt driveway, parking lot, or commercial property, you may need to update your property with an asphalt overlay. With an asphalt overlay, you don’t have to worry about redoing your driveway or lot with extensive construction and time. It is simply overlaying new asphalt over the older surfaced for a smooth finish. Sundman Paving & Sealcoating can give you the best results with our asphalt services and bring your property to the next level.
To some, it may be confusing, but we want to make sure you know what you are getting into. Here is the step-by-step process of an asphalt overlay
First we will clean off the driveway or lot as best we can to remove unwanted materials and particles. We do this by blowing the asphalt clean with 200 mph of air and brushing it completely clean.
We will curb around all edges with a milling machine so the new asphalt can lay correctly. Next we will tack coat it so the new asphalt sticks to the existing.
We lay it 1.5 inches to two inches thick for the best results. Lastly, we roll over the new asphalt to give it a clean and smooth look. We then allow the asphalt to cure completely before you are able to use it.
If your current property could benefit from an asphalt overlay, call one of our specialists at Sundman Paving & Sealcoating to learn more about how we can help you. Take your property to the next level with Sundman!
Copyright 2018 Sundman Paving & Sealcoating Inc. | 18271 Territorial Rd, Suite 1, Maple Grove MN 55369
Professionally Managed by Back2Basics, LLC©